🛑 [blocked on tester feedback] Lexus IS300 2021

[anaqi]

Got a Vgate iCar Pro 2S OBD to test out sidecar.

I also have a Toyota connectable account that I've linked in sidecar.

OBD pairs with Sidecar. It can read the VIN, but nothing else is readable. I see the lock button after connecting Toyota online account, but I'm getting an error when I click on that. Attaching screenshots.

Created a post as per instructions, I can share logs if that's helpful. Thanks for your help!

Screenshot	Screenshot
Screenshot 2024-10-18 at 10.51.45 AM.jpeg (251.28 KiB) Viewed 1351 times	IMG_4852.PNG (378.75 KiB) Viewed 1351 times

[anaqi]

Removed the Toyota connected account and just using OBD, this is what I see. Emailing the obdlogs too. Thanks!

[jeff]

Thanks for sending the logs! Some next steps to see if we can get your car talking to us.

In a new Terminal session in Sidecar, please run the following commands:

Code: Select all

010D
ATSH7E1
010D
ATSH7E0
010D

This will test the vehicle speed parameter on the two ECUs that are reporting support for it.

Then, in a new terminal session, please run the following:

Code: Select all

ATTA2A
010D
ATSH7E1
010D
ATSH7E0
010D

And then in one more new terminal session, please run the following:

Code: Select all

ATTA2A
ATSH750
ATFCSH750
ATFCSD2A300000
ATCEA2A
ATFCSM1
2130

Once you've ran the above, if any data was returned by any of these methods please send another OBD log export. If all of the commands responded with "NO DATA" though, then just share a screenshot of the responses here and we'll try another set of command sequences.

[anaqi]

Thanks Jeff! Was able to get some data running these. Just emailed you the new obdlogs. Let me know if there is anything else I can test!

[jeff]

I see the lock button after connecting Toyota online account, but I'm getting an error when I click on that. Attaching screenshots.

This decoding error is fixed and will go out in v1.19. Thank you for the report!

[jeff]

Thank you for sending the logs! So it looks like your car is only wanting to respond to the general diagnostic tool requests, so let's try one more command sequence:

Code: Select all

ATSH7DF
010D

[jeff]

Ah and for good measure, let's also try:

Code: Select all

ATSH7E2
010D
ATSH7E3
010D
ATSH7E4
010D
ATSH7E5
010D
ATSH7E6
010D
ATSH7E7
010D

[anaqi]

Thank you! Just emailed you the new set of obdlogs, let me know if there is anything else I can try

[jeff]

The issue here looks similar to the one affecting the BMW X3 and Toyota Tacoma. Will be prioritizing a fix for this in the next Sidecar release. For now there's not much we can do remotely via the OBDb, so hold tight!

[jeff]

@anaqi v1.19.1-222 is now available to test! Please take it for a spin and share which Connectables are working here.