🕝 Hyundai IONIQ 5 Support

[zachmiles]

We'll use this thread to share the status of adding Hyundai IONIQ 5 support to Sidecar.

[jeff]

@IONIQ 5 owners: Once someone is able to confirm that the first three parameters currently defined for the IONIQ 5 are working I'll start digging into getting more parameters wired up.

The first three parameters are:

• IONIQ5_VPWR
• IONIQ5_HVBAT_SOC
• IONIQ5_HVBAT_SOC_DISP

All under the parameters tab. viewtopic.php?t=36 is the tester guide for OBD.

[spider]

I have a Ioniq 5 2022 (73KWh), downloaded the app and the companion ELMCheck.

My dongle is detected (Veepak). I also have another scanner app (simple called Car Scanner), if that can help.

Can I be added so I can provide the scan logs?

Thanks,
Lorenzo

[jeff]

I have a Ioniq 5 2022 (73KWh), downloaded the app and the companion ELMCheck.

My dongle is detected (Veepak). I also have another scanner app (simple called Car Scanner), if that can help.

Can I be added so I can provide the scan logs?

Thanks,
Lorenzo

Check your email

[jeff]

I've just ported over the IONIQ 6 pids we've been working on to the IONIQ 5. Confirm you're on SHA: e82a75d when testing. https://sidecar.clutch.engineering/help ... parameters for guidance on refreshing parameters.

[jeff]

@spider and @zachmiles I've just ported over the latest IONIQ 6 pids to the IONIQ 5. Please refresh your parameters, confirm you're on SHA: d038643, and then check that the new parameters work on your vehicles.

[Tiny.Mot]

Ive got the app loaded and my ODB reader ready. Can i get the code for beta testing? Any other steps i will need to follow for Ioniq 5 use?

[jeff]

Check your email

[jeff]

Any other steps i will need to follow for Ioniq 5 use?

Mainly need you to confirm the Connectables and various parameters work for your car, and then if you have any feature requests or things you'd like i improved in the app please share them here and I'll add them to the tracker!

[Tiny.Mot]

Did a drive around, never could tell if my ODB reader was talking to the app. It often would show a error "no connectables". I did have it track a little rive around the block but im only sing data for GPS and Max and average MPH. Not sure how to get any of the data to show up, in vehicle health nothing has popped up. I went into Vehicle parameters and am on SHA: d038643 and ive toggled on a bunch of things but still no data. Either i cant figure the app out or my ODB dongle is trash.