✅ [29-bit] Acura TLX (1st gen)

[sidbmw]

I’m not connected to the car at the moment but this is basically what I see. Same story for the BMW X3

Screenshot	Screenshot
IMG_0163.png (98.94 KiB) Viewed 1835 times	IMG_0162.png (123.19 KiB) Viewed 1835 times

[jeff]

Got it!

[sidbmw]

and no problem for the help! This project is very exciting!! If you decide to make it open source lmk and I'll contribute haha

[jeff]

The parameters are open source, so if you ever want to take a stab at adding your own parameters you can fork any vehicle repo and change your parameter source in Sidecar to your fork. This is a nifty way to test out new parameters without having to wait for me to do the round trip

[sidbmw]

Already on it!

[jeff]

Working on supporting 29 bit pids in the signalset definitions and need to test a few things out with the Acura.

I'm going to give a few command sequences to send. Each one should be ran in a new terminal instance. I'll explain what I'm trying to test in each one.

Default command state with no header or receive address filtering

Code: Select all

0100

With a header but no receive address filtering

Code: Select all

ATSHDB33F1
0100

With receive address filtering and no header

Code: Select all

ATCRA18DAF110
0100

With both a header and a receive address filter

Code: Select all

ATSHDB33F1
ATCRA18DAF110
0100

[jeff]

Thank you for the latest logs! I'll cut a new release now with this filtering behavior and let's cross our fingers you can start pulling parameters!

[jeff]

184 now available! Try scanning parameters and let me know if you get data.

[sidbmw]

Will do!

[sidbmw]

It works!!!