Page 2 of 6
Re: Hyundai Ioniq 6
Posted: Sat Sep 28, 2024 8:07 am
by jeff
I've added the full set of 192 HV battery cell parameters, which should allow you to pull the cell voltage map from your car now.
https://github.com/ElectricSidecar/Hyun ... ll/1/files
Please refresh your vehicle parameters and confirm you're on SHA: 640acdc, and then check your Battery > Modules parameters (you might need to scroll to the bottom) and you should see a cell voltage chart.
Guide on refreshing your vehicle parameters: https://sidecar.clutch.engineering/help ... parameters
Re: Hyundai Ioniq 6
Posted: Sat Sep 28, 2024 8:12 am
by Shaskan
Done ! New SHA OK
For tension error « not enough data in the response »
Re: Hyundai Ioniq 6
Posted: Sat Sep 28, 2024 8:13 am
by jeff
Do they all return errors like that?
Re: Hyundai Ioniq 6
Posted: Sat Sep 28, 2024 8:14 am
by jeff
Can you export your OBD scan logs and email them to support@clutch.engineering? Follow this guide: https://sidecar.clutch.engineering/help ... -scan-logs
I'll need to look at the actual data responses to see where the mismatch is occurring.
Re: Hyundai Ioniq 6
Posted: Sat Sep 28, 2024 8:15 am
by Shaskan
It seems yes not checked all 192 but every check was the same error
Re: Hyundai Ioniq 6
Posted: Sat Sep 28, 2024 8:16 am
by Shaskan
Mail sent with logs 
Re: Hyundai Ioniq 6
Posted: Sat Sep 28, 2024 8:24 am
by jeff
Looks like I went a little crazy with the offsets. Fixed now in SHA: c446210.
Re: Hyundai Ioniq 6
Posted: Sat Sep 28, 2024 8:31 am
by Shaskan
All good now !
Is it risky to let the scanner plugged all the time when car is off ?
Re: Hyundai Ioniq 6
Posted: Sat Sep 28, 2024 8:32 am
by jeff
I personally do not do that for a few reasons:
- It can drain your car's 12V battery.
- It can create a potential security risk, because anyone can connect to your scanner and potentially get access to your vehicle.
Re: Hyundai Ioniq 6
Posted: Sat Sep 28, 2024 8:32 am
by jeff
Is the cell chart loading correctly at the bottom of the page?
