✅ Hyundai Santa Fe Hybrid support

[funtaine]

Hi @jeff ! Screenshots attached here. I'll send you another round of OBD logs!

I'm driving the standard hybrid version of the Santa Fe, rather than the plug-in, so that particular parameter doesn't light up on this car.
State of health doesn't seem to be working, it's always at 0. Not sure if it is only relevant in the context of EVs?
Also, I don't see tire data on here, FWIW.

I know that Hyundais are internet-connected - the Bluelink system allows me to check climate, remote start and lock/unlock the car, look at diagnostics (kind of) - but the API is definitely not an open one. Someone compiled an unofficial API library on GitHub (https://github.com/Hacksore/bluelinky), linked if you've never had a look? Not sure if integrating something from here is even feasible or worth your time.

Thanks for all your time and effort, the app is great!

Screenshot	Screenshot	Screenshot
IMG_6540.jpeg (143.18 KiB) Viewed 759 times	IMG_6537.PNG (450.44 KiB) Viewed 759 times	IMG_6535.PNG (474.62 KiB) Viewed 759 times
IMG_6533.PNG (452.55 KiB) Viewed 759 times	IMG_6532.jpeg (227.63 KiB) Viewed 759 times

[jeff]

Removing SOH and adding tire pressure + speed in https://github.com/OBDb/Hyundai-Santa-Fe-Hybrid/pull/8.

Tracking SOH determination in https://github.com/OBDb/Hyundai-Santa-F ... d/issues/7

Please update parameters to SHA: 8550689 and see if your tire pressure values look correct; I ported them over from the other Hyundai parametersets but I believe the scalings are wrong. If you could take a screenshot of the tire pressure command data response + take note of your car's reported tire pressure at the same time, I'll be able to tune the scalings properly.

[jeff]

Also removing WH because it appears to be wrong.

[jeff]

Please update to SHA: a3ed162, check your tire parameters, and then send another OBD session log over. Going to start drawing the symbol now

[jeff]

WIP symbol from the beach I think it took me twice as long to design it in the Vision Pro due to the latency of my mouse >.<

[jeff]

Tuned

[jeff]

@funtaine You've got a vehicle icon now

[jubnub]

Hey Jeff, I started testing the 2021 MY. It is also just the standard hybrid and not the plug-in. It appears that everything that has been mentioned previously working for the 2022 MY is also working for 2021. It also did capture my VIN correctly. Also have the screenshot of the Connectables as well. Love the Santa Fe Icon by the way.

[jeff]

Hey Jeff, I started testing the 2021 MY. It is also just the standard hybrid and not the plug-in. It appears that everything that has been mentioned previously working for the 2022 MY is also working for 2021. It also did capture my VIN correctly. Also have the screenshot of the Connectables as well. Love the Santa Fe Icon by the way.

Awesome! Were you able to test with an OBD scanner yet? Based on the screenshot it looks like you might not have been connected when the screenshot was taken?

[jubnub]

I quickly scanned with OBD but I wasn't connected to it when I sent the screenshot. I'll have more time later today to use it more.